Realign crossbar and frame correctly
This instruction applies to the Cyseekin C10. If the handlebar and front wheel are not in line after assembly, in many cases this is not due to a defect but only a slight twist in the front area.
With a short readjustment, the crossbar or front frame area can usually be quickly realigned correctly.
C10
C10 Folding E-Bike: Realign crossbar and frame correctly
Please also watch the video for this:
Direct link: https://youtube.com/shorts/KHzV0xgVaDc?feature=share
Typical sign
The handlebar looks straight, but the front wheel points in a different direction – or the crossbar and wheel are visibly not in line.
Quick guide:
- Park the e-bike securely and turn it off.
- First check from the front whether the front wheel and handlebar are visibly twisted against each other.
- Loosen the relevant fastener slightly in the area of the crossbar or the front frame.
- Align the handlebar, crossbar, and front wheel neatly in a line again.
- Make sure the front wheel points straight ahead.
- Then evenly tighten the loosened screws again.
- Check again whether the handlebar and tires are now in the same line.
- If necessary, repeat the alignment in small steps.
Important at the end
- Please check the function after the adjustment first while stationary.
- Then test the e-bike carefully at low speed.
- Only use the e-bike normally again once everything is functioning correctly.
If the problem persists
If the problem cannot be resolved with the described adjustment, please contact Cyseekin Support.
✉️ Email: support@cyseekinbike.com
With a short photo or video, we can review the case faster and initiate the after-sales process directly for you.
If possible, please send a short recording of the problem along with a photo or video of the affected area.
Share:
Can I charge my e-bike at a regular power outlet? 5 Safety Tips
C10 Quick Release for the Front Wheel – Fast Centering