Adjusting brake disc noise
These instructions apply to the Cyseekin C10. In many cases, rubbing or friction noises at the brake disc are not caused by a defective part, but by slight misalignment after transport or assembly.
A quick adjustment can often resolve the noise quickly.
C10
Adjusting brake disc noise | Cyseekin C10
Please also watch the video:
Direct link: https://youtu.be/SEd-6ylrLP0
Typical indication
You hear a slight rubbing or recurring noise at the brake disc when turning the wheel.
Quick guide:
- Switch off the e-bike and park it securely.
- First check whether the brake disc spins freely and where the rubbing noise is coming from.
- Slightly loosen the brake caliper mounting bolts.
- Realign the brake caliper so that the brake disc runs as centrally as possible.
- Then tighten the screws evenly again.
- Turn the wheel again and check whether the noise has disappeared.
- If necessary, repeat the fine adjustment once more.
- Then carefully test the brake while stationary and subsequently at low speed.
Important final step
- After the adjustment, please first check that it functions correctly while stationary.
- Then test the e-bike carefully at low speed.
- Do not use the e-bike normally again until everything is working correctly.
If the problem persists
If the problem cannot be resolved with the described adjustment, please contact Cyseekin Support.
✉️ Email: support@cyseekinbike.com
A short photo or video will help us review the case more quickly and initiate the after-sales process for you directly.
If possible, please include a short recording of the problem as well as a photo or video of the affected area.





Share:
How to Install the Thumb Throttle on Your Cyseekin E-Bike
Cyseekin FAQs in April: Shipping, Accessories, Warranty & Model Questions Simply Explained